Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Industrial Relay/UniversalDescription: AF The series contactor, 3-pole AF contactor, is an AC/DC operated AF09-AF38 contactor that includes an electronic coil interface and can accept a wide range of control voltages Ucmin Ucmax. Only 4 coils contain control voltage of 24 → 500 V AC or 20 → 500 V DC. The AF. Z contactor is equipped with a Z coil type, allowing direct control through 24 V DC, 500 mA PLC output, which can reduce coil consumption. The AF. Z contactor can withstand short-term drops and voltage interruptions (in accordance with SEMI F47-0706). The AF40-AF96 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are designed with a block shape of 3 main poles. The AF116-AF140 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC, while the AF146 AF190-AF370 contactor is mainly used to control 3-phase motors and power circuits up to 1000 V AC. These contactors are designed in a block shape with 3 main poles. The AF contactor has built-in surge protection and does not require any additional surge suppressors. Standard IEC 60947-1/60947-4-7 and EN 60947-1/60947-4-1. ABB AF series47011+$4314.615810+$4275.392025+$4255.780150+$4236.1682100+$4216.5564150+$4196.9445250+$4177.3326500+$4157.7207 -
![]()
Category: Industrial Relay/UniversalDescription: VB6/VB7 - Compact Rreversing Contactors The mechanical lock between the two contactors prevents one of the contactors from switching on, as long as the other is still switched on and vice versa. Switching over reversing contactors too quickly poses the risk of a phase short circuit. This is the case if the arc of the contactor switching off has not yet extinguished and the contacts of the contactor switching on are already closed. To avoid this risk, the two contactor coils must be switched to idle for a minimum of 50 ms during the switchover process and electrically locked against each other. Technical specifications --- Rated operating voltage: | 220 to 240Vac Mechanical lifespan: | 10 m switching cycles Ambient temperature: | -25°C to +55°C Selection guide --- Type | Auxiliary switch | Motor rating (AC2/3) | Motor rating (AC2/3) | | 220/240V | 380/440V VB 6-30-10 | 1 NO | 2.2 kW | 4kW VB 6-30-01 | 1 NC | 2.2 kW | 4kW VB 7-30-10 | 1 NO | 3kW | 5.5kW VB 7-30-01 | 1 NC | 3kW | 5.5kW ### ABB contactor70141+$445.303010+$433.686450+$424.7803100+$421.6826200+$419.3593500+$416.26151000+$414.32542000+$412.3893 -
![]()
Category: Industrial Relay/UniversalDescription: AF The series contactor, 3-pole AF contactor, is an AC/DC operated AF09-AF38 contactor that includes an electronic coil interface and can accept a wide range of control voltages Ucmin Ucmax. Only 4 coils contain control voltage of 24 → 500 V AC or 20 → 500 V DC. The AF. Z contactor is equipped with a Z coil type, allowing direct control through 24 V DC, 500 mA PLC output, which can reduce coil consumption. The AF. Z contactor can withstand short-term drops and voltage interruptions (in accordance with SEMI F47-0706). The AF40-AF96 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are designed with a block shape of 3 main poles. The AF116-AF140 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC, while the AF146 AF190-AF370 contactor is mainly used to control 3-phase motors and power circuits up to 1000 V AC. These contactors are designed in a block shape with 3 main poles. The AF contactor has built-in surge protection and does not require any additional surge suppressors. Standard IEC 60947-1/60947-4-7 and EN 60947-1/60947-4-1. ABB AF series82661+$456.512110+$444.603050+$435.4728100+$432.2971200+$429.9153500+$426.73951000+$424.75472000+$422.7699 -
![]()
Category: Industrial Relay/UniversalDescription: AF The series contactor, 3-pole AF contactor, is an AC/DC operated AF09-AF38 contactor that includes an electronic coil interface and can accept a wide range of control voltages Ucmin Ucmax. Only 4 coils contain control voltage of 24 → 500 V AC or 20 → 500 V DC. The AF. Z contactor is equipped with a Z coil type, allowing direct control through 24 V DC, 500 mA PLC output, which can reduce coil consumption. The AF. Z contactor can withstand short-term drops and voltage interruptions (in accordance with SEMI F47-0706). The AF40-AF96 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are designed with a block shape of 3 main poles. The AF116-AF140 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC, while the AF146 AF190-AF370 contactor is mainly used to control 3-phase motors and power circuits up to 1000 V AC. These contactors are designed in a block shape with 3 main poles. The AF contactor has built-in surge protection and does not require any additional surge suppressors. Standard IEC 60947-1/60947-4-7 and EN 60947-1/60947-4-1. ABB AF series49911+$3343.480810+$3313.085525+$3297.887950+$3282.6902100+$3267.4926150+$3252.2950250+$3237.0973500+$3221.8997 -
![]()
Category: Relays and accessoriesDescription: ABB LT140-30L Terminal cover, contactor89021+$113.353210+$108.4248100+$107.5377250+$106.8477500+$105.76351000+$105.27062500+$104.58065000+$103.9892 -
![]()
Category: Industrial Relay/UniversalDescription: AF Contact blocks used together with contactors should be installed on the front or side, with screw type connection terminals # # # Standard UL 508, CSA C22.2 N14 # # # ABB AF series66001+$265.201510+$258.283250+$252.9792100+$251.1343200+$249.7506500+$247.90581000+$246.75272000+$245.5997 -
![]()
Category: Industrial Relay/UniversalDescription: AF The series contactor, 3-pole AF contactor, is an AC/DC operated AF09-AF38 contactor that includes an electronic coil interface and can accept a wide range of control voltages Ucmin Ucmax. Only 4 coils contain control voltage of 24 → 500 V AC or 20 → 500 V DC. The AF. Z contactor is equipped with a Z coil type, allowing direct control through 24 V DC, 500 mA PLC output, which can reduce coil consumption. The AF. Z contactor can withstand short-term drops and voltage interruptions (in accordance with SEMI F47-0706). The AF40-AF96 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are designed with a block shape of 3 main poles. The AF116-AF140 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC, while the AF146 AF190-AF370 contactor is mainly used to control 3-phase motors and power circuits up to 1000 V AC. These contactors are designed in a block shape with 3 main poles. The AF contactor has built-in surge protection and does not require any additional surge suppressors. Standard IEC 60947-1/60947-4-7 and EN 60947-1/60947-4-1. ABB AF series90711+$4347.367210+$4307.845725+$4288.084950+$4268.3242100+$4248.5634150+$4228.8026250+$4209.0419500+$4189.2811 -
![]()
Category: Industrial Relay/UniversalDescription: AF Series contactors, the 4-pole ABB 4-pole contactor series is suitable for controlling power circuits up to 690 V AC and 440 V DC. Built in surge protection, no need for additional surge suppressors to manage large control voltage changes. One coil can be used for different control voltages and can be used worldwide without changing the coil. ABB AF series55651+$394.645510+$384.350450+$376.4575100+$373.7121200+$371.6531500+$368.90781000+$367.19192000+$365.4761 -
![]()
Category: Industrial Relay/UniversalDescription: AF Series contactors, the 4-pole ABB 4-pole contactor series is suitable for controlling power circuits up to 690 V AC and 440 V DC. Built in surge protection, no need for additional surge suppressors to manage large control voltage changes. One coil can be used for different control voltages and can be used worldwide without changing the coil. ABB AF series22371+$438.437510+$427.000050+$418.2313100+$415.1813200+$412.8938500+$409.84381000+$407.93752000+$406.0313 -
![]()
Category: Industrial Relay/UniversalDescription: AF The series contactor, 3-pole AF contactor, is an AC/DC operated AF09-AF38 contactor that includes an electronic coil interface and can accept a wide range of control voltages Ucmin Ucmax. Only 4 coils contain control voltage of 24 → 500 V AC or 20 → 500 V DC. The AF. Z contactor is equipped with a Z coil type, allowing direct control through 24 V DC, 500 mA PLC output, which can reduce coil consumption. The AF. Z contactor can withstand short-term drops and voltage interruptions (in accordance with SEMI F47-0706). The AF40-AF96 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are designed with a block shape of 3 main poles. The AF116-AF140 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC, while the AF146 AF190-AF370 contactor is mainly used to control 3-phase motors and power circuits up to 1000 V AC. These contactors are designed in a block shape with 3 main poles. The AF contactor has built-in surge protection and does not require any additional surge suppressors. Standard IEC 60947-1/60947-4-7 and EN 60947-1/60947-4-1. ABB AF series80201+$138.971810+$135.346450+$132.5670100+$131.6002200+$130.8751500+$129.90841000+$129.30422000+$128.6999 -
![]()
Category: Industrial Relay/UniversalDescription: AF The series contactor, 3-pole AF contactor, is an AC/DC operated AF09-AF38 contactor that includes an electronic coil interface and can accept a wide range of control voltages Ucmin Ucmax. Only 4 coils contain control voltage of 24 → 500 V AC or 20 → 500 V DC. The AF. Z contactor is equipped with a Z coil type, allowing direct control through 24 V DC, 500 mA PLC output, which can reduce coil consumption. The AF. Z contactor can withstand short-term drops and voltage interruptions (in accordance with SEMI F47-0706). The AF40-AF96 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are designed with a block shape of 3 main poles. The AF116-AF140 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC, while the AF146 AF190-AF370 contactor is mainly used to control 3-phase motors and power circuits up to 1000 V AC. These contactors are designed in a block shape with 3 main poles. The AF contactor has built-in surge protection and does not require any additional surge suppressors. Standard IEC 60947-1/60947-4-7 and EN 60947-1/60947-4-1. ABB AF series24481+$138.553210+$134.938750+$132.1677100+$131.2038200+$130.4809500+$129.51711000+$128.91472000+$128.3123 -
![]()
Category: Industrial Relay/UniversalDescription: AF The series contactor, 3-pole AF contactor, is an AC/DC operated AF09-AF38 contactor that includes an electronic coil interface and can accept a wide range of control voltages Ucmin Ucmax. Only 4 coils contain control voltage of 24 → 500 V AC or 20 → 500 V DC. The AF. Z contactor is equipped with a Z coil type, allowing direct control through 24 V DC, 500 mA PLC output, which can reduce coil consumption. The AF. Z contactor can withstand short-term drops and voltage interruptions (in accordance with SEMI F47-0706). The AF40-AF96 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are designed with a block shape of 3 main poles. The AF116-AF140 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC, while the AF146 AF190-AF370 contactor is mainly used to control 3-phase motors and power circuits up to 1000 V AC. These contactors are designed in a block shape with 3 main poles. The AF contactor has built-in surge protection and does not require any additional surge suppressors. Standard IEC 60947-1/60947-4-7 and EN 60947-1/60947-4-1. ABB AF series65661+$687.478110+$663.356150+$660.3408100+$657.3256150+$652.5012250+$648.2798500+$644.05851000+$639.2341 -
![]()
Category: Industrial Relay/UniversalDescription: AF The series contactor, 3-pole AF contactor, is an AC/DC operated AF09-AF38 contactor that includes an electronic coil interface and can accept a wide range of control voltages Ucmin Ucmax. Only 4 coils contain control voltage of 24 → 500 V AC or 20 → 500 V DC. The AF. Z contactor is equipped with a Z coil type, allowing direct control through 24 V DC, 500 mA PLC output, which can reduce coil consumption. The AF. Z contactor can withstand short-term drops and voltage interruptions (in accordance with SEMI F47-0706). The AF40-AF96 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are designed with a block shape of 3 main poles. The AF116-AF140 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC, while the AF146 AF190-AF370 contactor is mainly used to control 3-phase motors and power circuits up to 1000 V AC. These contactors are designed in a block shape with 3 main poles. The AF contactor has built-in surge protection and does not require any additional surge suppressors. Standard IEC 60947-1/60947-4-7 and EN 60947-1/60947-4-1. ABB AF series62901+$2806.246310+$2780.735025+$2767.979350+$2755.2236100+$2742.4680150+$2729.7123250+$2716.9566500+$2704.2010 -
![]()
Category: Industrial Relay/UniversalDescription: AF The series contactor, 3-pole AF contactor, is an AC/DC operated AF09-AF38 contactor that includes an electronic coil interface and can accept a wide range of control voltages Ucmin Ucmax. Only 4 coils contain control voltage of 24 → 500 V AC or 20 → 500 V DC. The AF. Z contactor is equipped with a Z coil type, allowing direct control through 24 V DC, 500 mA PLC output, which can reduce coil consumption. The AF. Z contactor can withstand short-term drops and voltage interruptions (in accordance with SEMI F47-0706). The AF40-AF96 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are designed with a block shape of 3 main poles. The AF116-AF140 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC, while the AF146 AF190-AF370 contactor is mainly used to control 3-phase motors and power circuits up to 1000 V AC. These contactors are designed in a block shape with 3 main poles. The AF contactor has built-in surge protection and does not require any additional surge suppressors. Standard IEC 60947-1/60947-4-7 and EN 60947-1/60947-4-1. ABB AF series20291+$1984.912610+$1966.867925+$1957.845650+$1948.8233100+$1939.8010150+$1930.7786250+$1921.7563500+$1912.7340 -
![]()
Category: Industrial Relay/UniversalDescription: AF When using contactors together, the contact block should be installed on the front or side, with screw type connection terminals in accordance with UL 508, CSA C22.2 N14 ABB AF series standards13811+$53.732510+$50.6495100+$48.3592250+$48.0069500+$47.65451000+$47.25812500+$46.90585000+$46.6856 -
![]()
Category: Safety typeDescription: ABB JSBT5 The ABB JSBT5 safety relay is a single channel safety relay designed to directly connect safety equipment to the relay in voltage power circuits. It has 3 normally open safety outputs, 1 normally closed output, 1 test input, and complete internal monitoring. The test input is applicable when the contactor or valve has fallen/returned before allowing a new start. The test input can also be used to activate and monitor the start button. JSBT5 has dual sum monitoring internal security function. It can operate safely in the event of power failure, internal component failure, or external interference. ###Features and advantages: Single channel and dual channel test/start input width of 22.5mm LED indicator with 3 normally open/1 normally closed relay outputs. Application: JSBT5 is suitable for monitoring emergency stops and interlocking cabins. ###Note that inventory number 917-6670 has delayed output, 0.5 seconds # # # approved CE, TUV NORD, cSAus. ###Standards 2006/42/EC, 2006/95/EC, 2004/108/EC, EN 62061:2005, EN ISO 13849-1:2008. ###Safety relay12711+$2049.903910+$2031.268425+$2021.950750+$2012.6329100+$2003.3152150+$1993.9974250+$1984.6797500+$1975.3619 -
![]()
Category: Relays and accessoriesDescription: ABB AF series69841+$72.289010+$69.1460100+$68.5803250+$68.1402500+$67.44881000+$67.13452500+$66.69455000+$66.3173 -
![]()
Category: Industrial Relay/UniversalDescription: Auxiliary Switch - Front Installation # # # ABB MS116 Series98151+$109.888310+$105.1105100+$104.2505250+$103.5816500+$102.53051000+$102.05272500+$101.38395000+$100.8105 -
![]()
Category: Industrial Relay/UniversalDescription: AF The series contactor, 3-pole AF contactor, is an AC/DC operated AF09-AF38 contactor that includes an electronic coil interface and can accept a wide range of control voltages Ucmin Ucmax. Only 4 coils contain control voltage of 24 → 500 V AC or 20 → 500 V DC. The AF. Z contactor is equipped with a Z coil type, allowing direct control through 24 V DC, 500 mA PLC output, which can reduce coil consumption. The AF. Z contactor can withstand short-term drops and voltage interruptions (in accordance with SEMI F47-0706). The AF40-AF96 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are designed with a block shape of 3 main poles. The AF116-AF140 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC, while the AF146 AF190-AF370 contactor is mainly used to control 3-phase motors and power circuits up to 1000 V AC. These contactors are designed in a block shape with 3 main poles. The AF contactor has built-in surge protection and does not require any additional surge suppressors. Standard IEC 60947-1/60947-4-7 and EN 60947-1/60947-4-1. ABB AF series6273 -
![]()
Category: Industrial Relay/UniversalDescription: AF The series contactor, 3-pole AF contactor, is an AC/DC operated AF09-AF38 contactor that includes an electronic coil interface and can accept a wide range of control voltages Ucmin Ucmax. Only 4 coils contain control voltage of 24 → 500 V AC or 20 → 500 V DC. The AF. Z contactor is equipped with a Z coil type, allowing direct control through 24 V DC, 500 mA PLC output, which can reduce coil consumption. The AF. Z contactor can withstand short-term drops and voltage interruptions (in accordance with SEMI F47-0706). The AF40-AF96 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are designed with a block shape of 3 main poles. The AF116-AF140 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC, while the AF146 AF190-AF370 contactor is mainly used to control 3-phase motors and power circuits up to 1000 V AC. These contactors are designed in a block shape with 3 main poles. The AF contactor has built-in surge protection and does not require any additional surge suppressors. Standard IEC 60947-1/60947-4-7 and EN 60947-1/60947-4-1. ABB AF series6256 -
![]()
Category: Industrial Relay/UniversalDescription: AF The series contactor, 3-pole AF contactor, is an AC/DC operated AF09-AF38 contactor that includes an electronic coil interface and can accept a wide range of control voltages Ucmin Ucmax. Only 4 coils contain control voltage of 24 → 500 V AC or 20 → 500 V DC. The AF. Z contactor is equipped with a Z coil type, allowing direct control through 24 V DC, 500 mA PLC output, which can reduce coil consumption. The AF. Z contactor can withstand short-term drops and voltage interruptions (in accordance with SEMI F47-0706). The AF40-AF96 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC and 220 V DC. These contactors are designed with a block shape of 3 main poles. The AF116-AF140 contactor is mainly used to control 3-phase motors and power circuits up to 690 V AC, while the AF146 AF190-AF370 contactor is mainly used to control 3-phase motors and power circuits up to 1000 V AC. These contactors are designed in a block shape with 3 main poles. The AF contactor has built-in surge protection and does not require any additional surge suppressors. Standard IEC 60947-1/60947-4-7 and EN 60947-1/60947-4-1. ABB AF series59961+$4071.271610+$4034.260025+$4015.754350+$3997.2485100+$3978.7427150+$3960.2369250+$3941.7311500+$3923.2254 -
![]()
Category: Industrial Relay/UniversalDescription: CM-TCS The temperature monitoring relay CM-TCS uses PT100 sensors to monitor whether the temperature is too high, too low, or between two thresholds. When the temperature drops to or exceeds the maximum value, the output relay immediately changes its position according to the configured function. The front LED will display the current status. Provide two different terminal block models (screw connection or easy connection push in type) for precise configuration and adjustment through front working components, with direct reading scale board short circuit monitoring and interrupt wire detection 3 LEDs for indicating operating status. Approved housing material, can achieve the highest fire rating UL 94V-0. ABB CM series73721+$1449.773610+$1436.593825+$1430.004050+$1423.4141100+$1416.8242150+$1410.2343250+$1403.6444500+$1397.0546 -
![]()
Category: Industrial Relay/UniversalDescription: AF Series contactors, the 4-pole ABB 4-pole contactor series is suitable for controlling power circuits up to 690 V AC and 440 V DC. Built in surge protection, no need for additional surge suppressors to manage large control voltage changes. One coil can be used for different control voltages and can be used worldwide without changing the coil. ABB AF series82611+$968.847210+$934.852650+$930.6033100+$926.3539150+$919.5550250+$913.6060500+$907.65691000+$900.8580 -
![]()
Category: Industrial Relay/UniversalDescription: AF Series contactors, the 4-pole ABB 4-pole contactor series is suitable for controlling power circuits up to 690 V AC and 440 V DC. Built in surge protection, no need for additional surge suppressors to manage large control voltage changes. One coil can be used for different control voltages and can be used worldwide without changing the coil. ABB AF series47871+$383.962010+$373.945650+$366.2664100+$363.5953200+$361.5920500+$358.92101000+$357.25162000+$355.5822 -
![]()
Category: Industrial Relay/UniversalDescription: AF Series contactors, the 4-pole ABB 4-pole contactor series is suitable for controlling power circuits up to 690 V AC and 440 V DC. Built in surge protection, no need for additional surge suppressors to manage large control voltage changes. One coil can be used for different control voltages and can be used worldwide without changing the coil. ABB AF series20941+$1848.760110+$1831.953225+$1823.549750+$1815.1463100+$1806.7428150+$1798.3394250+$1789.9359500+$1781.5325 -
![]()
Category: Industrial Relay/UniversalDescription: AF12 3Pole Contactor, 9A, 5.5kW, 130V dc Coil40361+$343.479710+$334.519450+$327.6498100+$325.2603200+$323.4683500+$321.07891000+$319.58552000+$318.0921 -
![]()
Category: Industrial Relay/UniversalDescription: AF Series contactors, the 4-pole ABB 4-pole contactor series is suitable for controlling power circuits up to 690 V AC and 440 V DC. Built in surge protection, no need for additional surge suppressors to manage large control voltage changes. One coil can be used for different control voltages and can be used worldwide without changing the coil. ABB AF series42611+$271.206810+$264.131850+$258.7077100+$256.8210200+$255.4061500+$253.51941000+$252.34022000+$251.1611 -
![]()
Category: Industrial Relay/UniversalDescription: AF Series contactors, the 4-pole ABB 4-pole contactor series is suitable for controlling power circuits up to 690 V AC and 440 V DC. Built in surge protection, no need for additional surge suppressors to manage large control voltage changes. One coil can be used for different control voltages and can be used worldwide without changing the coil. ABB AF series89461+$1355.550910+$1343.227725+$1337.066150+$1330.9045100+$1324.7429150+$1318.5813250+$1312.4197500+$1306.2581 -
![]()
Category: Industrial Relay/UniversalDescription: ABB AF09-40-00-14 Metal contact core, 4NO, DIN rail installation, 500 V, 25 A, 500 V, 500 V26891+$319.979510+$311.632250+$305.2326100+$303.0066200+$301.3372500+$299.11121000+$297.72002000+$296.3288 -
![]()
Category: Industrial Relay/UniversalDescription: AF Series contactors, the 4-pole ABB 4-pole contactor series is suitable for controlling power circuits up to 690 V AC and 440 V DC. Built in surge protection, no need for additional surge suppressors to manage large control voltage changes. One coil can be used for different control voltages and can be used worldwide without changing the coil78771+$867.709910+$837.263950+$833.4582100+$829.6524150+$823.5632250+$818.2352500+$812.90711000+$806.8179
